I get asked a lot of questions by beginner CNC enthusiasts. One of the first questions that always comes up is where to find a CNC Router Bit Starter Set?

Rather than lead you on a merry chase all over the internet, I though I would compile a list of bits that you need to get started. To make things easier I selected only bits available through Amazon.com. Most of us already use Amazon anyway so why make it hard on yourself? This set of bits will get you through 90% of the projects you will encounter.I also set up another goal when choosing these bits. I wanted to keep the price below $200 for a complete set of router bits. The bundle includes 22 bit (some duplicates) and an average cost of $8.35 per bit.Can you find Router Bits cheaper somewhere else? Certainly. I suggest you shop around. When you find a good source of bits please share your information with us and we will pass it on to the readers.

Up spiral bits have helical shaped flutes which eject the saw dust upward out of the kerf. They leave a rough top surface and a smooth bottom surface.
http://amzn.to/1xAWNav

Down Spiral bits has helical flutes which force the saw dust down into the kerf. The tightly pack sawdust is enough to hold a part in place while cutting. Leaves a smooth
http://amzn.to/1zyhL8i

Straight bits a one of the first types of bit developed for routers. They are commonly used in hand held router but can be used in CNC routers to remove lots of material.
http://amzn.to/1AiOhiT

V Groove bits can be used to create V-Carved letters and chamfers. They come in many different angles and diameter. Most common examples are 60 degree, 90 degree and 110 degree.
http://amzn.to/1Bj1vKE

Surfacing bits are also know as bottom cleaning bits. They are used to level the surface of the spoil board before cutting projects.
http://amzn.to/1CUa3M3

Ball Nose Bits have a rounded tip or nose. They are used to make 3D carvings. The ball nose bit leaves a smooth finish on the workpiece and require very little sanding.
http://amzn.to/1y8UZs4